Since the iOS 18.4 update in April 2025, Apple supports Matter Robot Vacuums, as Smart Home Centre discovered and tested successfully with the SwitchBot S10. With this device type added to Apple HomeKit, it’s interesting to look into all robot vacuums with support for Matter, either promised, certified or actually implemented. Matter support can also vary between products, as some are certified with Matter 1.2 or 1.3 and some with Matter 1.4. While Matter version 1.2 allows changes in cleaning modes, start, pauze and return to dock, with Matter 1.4 you can also control the room(s) your robot vacuum needs to clean. Although there’s a growing list of robot vacuums with a Matter certification, not all of them are already updated by the manufacturer. This means the user cannot create a Matter paring code until a firmware update enables this feature. As Home Assistant was the only platform with support for Matter robot vacuums, they probably didn’t see the urgency to push this update to users. With the support in Apple HomeKit, there is a growing list of manufacturers and models with Matter support.
Last Update: 30-11-2025 – See an overview and details of all updates at the end of this article.
A lot of Robot Vacuums with Matter are now discounted up to 50% during Black Friday 2025. Check the best deals in our Black Friday Matter Robot Vacuum overview.
Robot Vacuums with Matter support
When talking about Matter support, there are typically two ways this can be implemented. Either via a hub as a on/off switch, which doesn’t utilize the official robot vacuum device type. The second way is native support, with no need for a brand-specific hub. Currently all robovacs available use Matter over WiFi to implement this. This will enable the official robot vacuum features implemented by Matter, either in version 1.2 or 1.4. This is the list of robot vacuums, either available or announced, with native Matter support:
- SwitchBot S10
- SwitchBot S20
- SwitchBot K10+ Pro Combo
- SwitchBot K20+ Pro
- SwitchBot K11+
- Roborock Saros 10
- Roborock Saros 10R
- Roborock S8 MaxV Ultra
- Roborock Qrevo Edge
- Roborock Qrevo Edge S5A
- Roborock Qrevo CurvX
- Roborock Qrevo Curv
- Roborock Qrevo Curv S5X
- Roborock Saros Z70
- Roborock Qrevo Master
- Roborock S8 Max Ultra
- Roborock Qrevo Slim
- Ecovacs X2 Combo
- Ecovacs X8 Pro Omni
- Ecovacs T50 Pro Omni
- Dreame X40 Ultra
- Dreame X50 Ultra
- Dreame L50 Ultra
- iRobot Roomba Combo 10
- iRobot Roomba Plus 505 Combo
- iRobot Roomba Max 705
- Eufy Omni S1
- Eufy Omni E25
- Eufy Omni E28
- Tapo RV20 Max
- Tapo RV20 Max Plus
- Tapo RV30 Max
- Tapo RV30 Max Plus
- Eureka J15 Pro Ultra
SwitchBot
With the S10 Robot Vacuum, SwitchBot is the first brand to support Matter Robot Vacuums in Apple HomeKit. We’ve recently written an article about setting up Matter on the SwitchBot S10 and connecting it to Apple HomeKit with iOS 18.4 You can find a full overview of the current Matter status of SwitchBot Robot Vacuums below.
| Model | Matter Certified | Matter version | Remarks |
| SwitchBot S10 | Yes, since 20/08/2025 | 1.4 | Already supports Matter 1.2 since 27/09/2024, but Matter 1.4 certified since 20/08/2025. Works now with Matter 1.4. |
| SwitchBot K10+ Pro Combo | Yes, since 28/07/2025 | 1.4 | Already supports Matter 1.2 since 05/11/2024, but Matter 1.4 certified since 28/07/2025. |
| SwitchBot K20+ Pro | Yes, since 13/08/2025 | 1.4 | Already supports Matter 1.2 since 04/11/2024, but Matter 1.4 certified since 13/08/2025. |
| SwitchBot S20 | Yes, since 01/08/2025 | 1.4 | Works with Matter 1.4 in Apple HomeKit |
| SwitchBot K11+ | Yes, since 30/06/2025 | 1.4 | Works with Matter 1.4 in Apple HomeKit |
| SwitchBot K10+ / SwitchBot K10+ Pro | No | – | Given the K10+ Pro Combo is already certified in november, we do not expect native Matter support. On/off button via SwitchBot Hub available. |
Roborock
Roborock already certified their S8 MaxV Ultra a year ago, but never actually updated the firmware of the device for uses to enable this feature. This is about to change with the support of Matter robot vacuums in Apple HomeKit, which allows a lot more users to actually integrate their robovac into their Smart Home platform. The S8 is Matter 1.2 certified, while all newer models work with version 1.4, allowing users to control the rooms to clean in Apple HomeKit.
On March 31st 2025, Roborock announced Matter support implementation for several models, which is reflected in the table below. Most models are expected to receive a firmware update early April. This includes the Roborock Saros 10 and Roborock Saros 10R and the Saros Z70, which features a robotic arm and is expected later this year.
| Model | Matter Certified | Matter version | Remarks |
| Roborock Saros 10 / Roborock Saros 10R | Yes, since 20/02/2025 | 1.4 | Works with Matter in Apple HomeKit with iOS 18.4 with firmware version 02.32.44 |
| Roborock S8 MaxV Ultra | Yes, since 27/03/2024 | 1.2 | Works with Matter in Apple HomeKit with iOS 18.4 with firmware version 02.37.88 |
| Roborock Saros Z70 | Unknown | 1.4 | Works with Matter in Apple HomeKit with iOS 18.4 with firmware version 02.40.92 |
| Roborock Qrevo Edge / Roborock Qrevo Edge S5A | Unknown | 1.4 | Works with Matter in Apple HomeKit with iOS 18.4 with firmware version 02.26.02 |
| Roborock Qrevo CurvX/ Roborock Qrevo Curv / Roborock Qrevo Curv S5X | Unknown | 1.4 | Works with Matter in Apple HomeKit with iOS 18.4 with firmware version 02.26.02 |
| Roborock Qrevo Master | Unknown | 1.2 or 1.4 | Works with Matter in Apple HomeKit with iOS 18.4 with firmware version 02.27.40 |
| Roborock S8 Max Ultra | Unknown | 1.2 or 1.4 | Firmware update expected in Q2/Q3 2025 |
| Roborock Qrevo Slim | Unknown | 1.2 or 1.4 | Firmware update expected in Q2/Q3 2025 |
Ecovacs
Ecovacs has three models certified for Matter, the X2 Combo, X8 Pro Omni and the Ecovacs T50 Pro Omni. While the X2 combo is Matter 1.2 certified for a while now, the X8 Pro Omni and T50 Pro Omni both recently received their Matter certification.
| Model | Matter Certified | Matter version | Remarks |
| Ecovacs X2 Combo | Yes, since 28/06/2024 | 1.2 | Works over Matter with HomeKit and other Smart Home platform |
| Ecovacs X8 Pro Omni | Yes, since 20/02/2025 | 1.4 | Works over Matter with HomeKit and other Smart Home platform |
| Ecovacs T50 Pro Omni | Yes, since 05/03/2025 | 1.4 | Certified, but waiting for firmware update from Ecovacs |
Dreame
Dreame has three robot vacuums with Matter support, the X40 Ultra, X50 Ultra and Dreame L50 Ultra.
| Model | Matter Certified | Matter version | Remarks |
| Dreame X40 Ultra | Yes, since 31/05/2024 | 1.2 | Certified, but waiting for firmware update from Dreame. |
| Dreame X50 Ultra | Yes, since 21/05/2025 | 1.4 | Certified, but waiting for firmware update from Dreame. |
| Dreame L50 Ultra | Unknown | 1.4 | Matter support announced. Waiting for firmware update from Dreame. |
iRobot Roomba
Roomba currently offers three models with Matter support, the Roomba Combo 10, Roomba Plus 505 Combo and the Roomba Max 705. While the Combo 10 is already certified, this is not the case with the new 505 Combo and Max 705.
| Model | Matter Certified | Matter version | Remarks |
| iRobot Roomba Combo 10 | Yes, since 31/01/2025 | 1.3 | Matter 1.3 certified, probably because of no support for room control and therefore not adhering to Matter 1.4 specification. Waiting for firmware update from Roomba. |
| iRobot Roomba Plus 505 Combo | Yes, since 13/10/2025 | 1.4 | Matter 1.4 certified. |
| iRobot Roomba Max 705 | Yes, since 13/10/2025 | 1.4 | Matter 1.4 certified. |
Eufy
Eufy has a few robot vacuums with support for Matter, such as the Eufy Omni S1. While it’s Matter 1.3 certified, no extra functionality is available compared to Matter 1.2.
Smart Home Centre reached out to Eufy regarding their current support for Matter. Eufy told us they “identified certain challenges related to protocol compatibility and practical application of Matter integration. To ensure that every feature we offer meets the highest standards of quality and users satisfaction, we have decided not to roll out Matter support for the eufy Omni S1 Pro at this time.” While Matter already works for the Eufy Omni S1, this response indicates Matter support can’t be expected any time soon for the Eufy Omni S1 Pro.
| Model | Matter Certified | Matter version | Remarks |
| Eufy Omni S1 | Yes, since 11/10/2024 | 1.3 | Matter 1.3 certified, works with Matter in Apple HomeKit. Eufy app version 3.4.9 or higher is required. |
| Eufy Omni E25 | Yes, since 19/12/2024 | 1.3 | No room control with Matter 1.3 |
| Eufy Omni E28 | Yes, since 19/12/2024 | 1.3 | No room control with Matter 1.3 |
Tapo
Tapo, the Smart Home brand from TP-Link, announced Matter support for four of their robot vacuums: the Tapo RV20 Max, Tapo RV20 Max Plus, Tapo RV30 Max and Tapo RV30 Max Plus. The RV30 Max RV30 Max Plus already works over Matter, it’s currently unclear when this Matter support will be available for the other two models.
| Model | Matter Certified | Matter version | Remarks |
| Tapo RV20 Max / Tapo RV 20 Max Plus | Yes, since 11/12/2024 | 1.3 | Matter 1.3 certified, Tapo confirmed future Matter support on their website, no specific timelines available. |
| Tapo RV30 Max / Tapo RV30 Max Plus | Yes, since 11/12/2024 | 1.3 | Works over Matter 1.4 in HomeKit |
| Tapo RV50 Pro Omni | Yes, since 11/12/2024 | 1.3 | Works over Matter 1.4 in HomeKit |
Eureka
Eureka currently has one robot vacuum with Matter support, the J15 Pro Ultra. It is Matter 1.3 certified, which means you can control cleaning modes, but not the rooms to clean.
| Model | Matter Certified | Matter version | Remarks |
| Eureka J15 Pro Ultra | Yes, since 05/11/2024 | 1.3 | Matter 1.3 certified, unclear if firmware update is already available or when it will be released. |
Wrap-up Matter support Robot Vacuums
As of now, there is a growing number of robot vacuums, either available or announced, with Matter support. Not all of them are already Matter certified, so for some models you still need to have some patience. Even when certified, the manufacturer still needs to push a firmware update before you can actually use the functionality. We will update this article as soon as new robovacs are certified or firmware updates are available. If you like to have control over the rooms with Matter, you can take a look at the robot vacuums with Matter 1.4 support. Matter 1.2 and 1.3 only have control over cleaning modes, switching between vacuum and vacuum & mop and start/stop/return to dock.
Smart Home Centre has reached out the all manufacturers mentioned in this article. We’ve asked several questions regarding the current vacuums of their product line with Matter support, whether any existing or future models will gain Matter support and confirmation regarding room control with Matter version 1.4. Currently, we only received a response from Eufy, which we’ve included in the article. We will update you in this article as soon as any new information is available to us.
Update 04-03-2025: Added a response from Eufy regarding Matter support of the Eufy Omni S1 Pro.
Update 05-03-2025: Added the Ecovacs T50 Pro Omni, which is matter 1.4 certified since today.
Update 06-03-2025: Roborock Qrevo Edge S5A and Roborock Qrevo Curv S5X added.
Update 11-03-2025: iRobot Roomba Plus 505 Combo Robot added.
Update 01-04-2025: Added updates regarding Matter support of several Roborock models.
Update 02-04-2025: Added Tapo robot vacuums with Matter support announced.
Update 29-04-2025: Added Eufy Omni E25 and Eufy Omni E28.
Update 01-05-2025: Added iRobot Roomba Max 705 with Matter support added later this year.
Update 03-07-2025: Updated information on several models: official certification of Dreame X50 Ultra, launch of SwitchBot K20+ Pro and S20.
Update 21-08-2025: Updated information on several SwitchBot models with Matter 1.4 support.
Update 15-11-2025: Added Qrevo CurvX and Dreame L50 Ultra.
Update 30-11-2025: Updated several parts of the article to update to the current situation. Added Tap RV50 Pro Omni
Disclosure: This article contains affiliate links. If you purchase through these links, I may earn a small commission at no extra cost to you. This enables us to make content like this article. As an Amazon Associate, I earn from qualifying purchases. This does not impact our views on the products mentioned in this article.
You need to add Tapo!!
You’re right! Just added the four models that will get Matter support.
Thanks for adding Tapo – just noting that Matter 1.3 firmware was already released for the RV30 Max and RV30 Max Plus models back in February (see https://www.tp-link.com/us/support/download/tapo-rv30-max/#Firmware-Release-Notes and https://www.tp-link.com/us/support/download/tapo-rv30-max-plus/#Firmware-Release-Notes), but not for the RV20 Max and RV20 Max Plus yet. I have the Tapo RV30 Max and can confirm it adds to Apple Home.
Thanks for the update, I will adjust the article to reflect the RV30 Max and RV Max Plus already support Matter.